Korean l HOME l LOGIN l JOIN
PRODUCTS
MELTING FLUXES FOR COPPPER AND COPPER ALLOYS
MELTING FLUXES FOR ALUMINIUM AND ALUMINIUM ALLOYS
DEGASSING AGENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS
MELTING FLUXES FOR ZINC AND TIN
MELTING FLUXES FOR CAST IRON ANS CAST STEEL
PRODUCTS FOR MOULD AND CORE
COATING AND PARTING / RELEASE AGENT
NODULANTS FOR CAST IRON
INOCULANTS FOR CAST IRON
EXOTHERMIC RISERS AND SLEEVES
CERAMIC FOAM FLTERS
GATE BREAKER
DEVICE FOR MOLTEN METAL
DEGASSING MACHINE AND MEASUREMENT DEVICE FOR AI
CRUCIBLE
 
MELTING FLUXES FOR ZINC AND TIN

MELTING FLUXES FOR ZINC AND TIN

PRODUCTPURPOSEINSTRUCTIONEFFECTS & ADVANTAGESFORMPACKING
ZINCRIN 1Coating and cleaning of Zinc alloy and Zinc Magnesium alloysUse 250g for 500kg of ZINCRIN for 100kg of molten metal. Add 50% at the beginning of melting. After melting is completed. When remove dross. Add remaining 50% and wait for 1 minute. Then push it into the molten metal using skimmerLittle zinc and mg loss. little smoke remove non metallic impurities. cleaning of molten metal.Ash color powder25kg
paper bag
TINCOVER 100Coating and cleaning of Tin alloysUse 1~2kg for 100kg of molten metal. Add 1kg at the beginning of melting for coating. Add the remaining 1kg and push it into the bottom of molten metal 5 minutes before tappingPrevent oxidation. Decrease dross. Maximum effect on Babbitt metal.Ash color power25kg
paper bag
PLUMCOVER2Coating and cleaning of Lead alloysUse 200g for 100kg of molten metal. Add 100g at the beginning of melting for coating. Add the remaining and push it into the bottom of molten metal 5 minutes before tappingPrevent oxidation. Decrease dross.Ash color power25kg
paper bag
Metalcote 5Heat insulating coating for Aluminum alloy mould castingAfter mixing, dilute in water of 2~3 times in weight. Apply to the mould preheated to 100~120℃Moderate heat insulating. Suitable for piston casting.White paste5kg can
Metalcote 8Suitable for low pressure casting.Paste5kg can
METALCOTE 9Coating for Aluminum alloy and Non-Ferrous alloy.Thermal Conduction effect. Prevent oxidation.Black colloid5kg can
METALCOTE 6PLubricating and rapping of pressure Aluminum Zinc and Magnesium.Spray. Can be diluted by paraffin oil.Suitable for thin and complicated castings. Prevent impurities build up on die. Protect mould from rust. Easy stripping.Low viscosity mixture of oil and resin18kg can
METALCOTE 16PLubricating and rapping of pressure Aluminum.Can be applied by brush. Rag. Or spray gun. When spray. It can be diluted with paraffin oil.Olean casting surface by effective lubricating and stripping.concentrated paste15kg can
METALCOTE 210Water based stripping agent for pressure Aluminum and Zinc.Dilute with water 100~200 times in weight and use.No smoke or bad odor. Economical. Very clean casting surface.White liquid18kg can
100kg drum
LUBROL 7Lubricating for continuous casting of Aluminum alloy.Apply with brush or rag.Decrease molten metal build up on die. Clean slab or billet surface can be achieved.Graphite powder mixed with oil3kg can
15kg can
LUBROL 21High quality lubricating for Aluminum casting mould. Apply with rag or dilute with paraffin oil and spray.Maximum lubricating effect on mould for Aluminum casting. Graphite power with oil3kg can
15kg can
SANDCOTE 8WPTools. Ladle. And tundish coating for aluminum castingAdd 1/2~2/3 volume of water and use.Thick coating is possible. No cracking at high temperature. Suitable for various tools. Ladle. And tapping hole coating.White paste35kg can
HEAD OFFICE & FACTORY : 6.DAEGONNAM-RO 429 BEON-GIL, DAEGOT-MYEON, KIMPO-SI,GYE0NGGI-DO, KOREA | Tel.+82-31-997-3001~3 | Fax : +82-31-997-1033
BUSAN SALES OFFICE & WAREHOUSE : 1210-4,JISA-DONG, GANGSEO-KU,BUSAN, KOREA | Tel.+82-51-973-7771~3 | Fax.+82-51-973-7770
DAEGU SALES OFFICE & WAREHOUSE : 187 DASANSANDAN-RO, DASAN-MYUN, KORYUNG-KUN, KYUNGBUK, KOREA
Tel.+82-54-995-9271~2 | Fax.+82-54-955-9273
DAEJUN SALES OFFICE & WAREHOUSE : 515-8 DONGAN-RO, YUNMU-EUP, NONSAN-SHI, CUHUNG NAM, KOREA | Tel.+82-41-742-9992~3 | Fax.+82-41-742-9997